UTC 19:29:05 SAST 21:29 SFI 122 Kp 1 20 M GOOD 10 M FAIR 145.650 · 438.650 · 438.200 · 438.300 · 439.175
RAE practice questions

Chapter 14: The Transformer

Free practice questions on The Transformer, chapter 14 of the SARL's Class A manual, for South Africa's Radio Amateur Examination (RAE). Every question has the right answer and an explanation. Sections covered:

  • 14.1 Theory of operation
  • 14.2 Turns ratio
  • 14.3 Voltage ratio
  • 14.4 Current ratio
  • 14.5 Impedance ratio
  • 14.6 Applications

77 questions

  1. 1. Which effect is the working of a transformer based on?
    Show answer

    Electromagnetic induction

    AC in the primary sets up a changing magnetic field, which induces a voltage in the secondary: electromagnetic induction. Electrostatic induction is charge moved by an electric field, as between a capacitor’s plates.

  2. 2. By what means does energy pass from the primary winding of a transformer to its secondary winding?
    Show answer

    Inductive coupling through a changing magnetic field

    The primary’s changing magnetic field passes through the secondary and induces a voltage in it, so the windings are coupled inductively. There is a little stray capacitance between windings, but that is not how the power gets across.

  3. 3. Which statement best describes how a transformer produces the voltage across its secondary?
    Show answer

    A changing magnetic field passing through a conductor induces a voltage in it

    A magnetic field that keeps changing induces a voltage in any conductor it passes through, here the turns of the secondary. A transformer does not work through an electric field, and a steady magnetic field induces nothing.

  4. 4. The primary of a transformer is connected to a steady DC supply. Once the current has settled, what voltage appears across the secondary?
    Show answer

    No voltage of any kind

    Steady DC makes a steady magnetic field, and only a changing field induces a voltage, so apart from a brief pulse at switch-on the secondary gives nothing. The turns ratio applies only to AC.

  5. 5. What is the property called by which the changing current in a transformer’s primary induces a voltage in its secondary?
    Show answer

    Mutual inductance

    The manual calls it mutual inductance, to set it apart from self inductance, in which a coil’s changing current induces a voltage in that same coil, the property that characterises an inductor.

  6. 6. What does the alternating current flowing in a transformer’s primary winding produce?
    Show answer

    A fluctuating magnetic field

    A current that keeps changing produces a magnetic field that keeps changing, and this fluctuating field is what induces the voltage in the secondary. A steady field would come only from a steady current.

  7. 7. What is a transformer used for?
    Show answer

    Changing the voltage and current of AC

    A transformer changes the voltage and current of alternating current, raising one while lowering the other. Turning AC into DC is the job of a rectifier and smoothing, which in a power supply follow the transformer.

  8. 8. A transformer works by mutual inductance. What is self inductance, by contrast?
    Show answer

    A coil’s changing current inducing a voltage in that same coil

    Self inductance is a single coil’s changing current inducing a voltage in that same coil, the property of an inductor. When one coil’s changing current induces a voltage in another coil, that is mutual inductance.

  9. 9. Which winding of a transformer is its primary?
    Show answer

    The winding connected to the source of power

    The primary is the winding that receives power from the source; the windings feeding loads are secondaries. It need not be the winding wound first: which is which depends only on how the transformer is connected.

  10. 10. How does the usual circuit symbol of a transformer show which winding is the primary?
    Show answer

    It does not: it makes no distinction

    The symbol is just two coils side by side and does not show which is which; the primary is whichever winding the source feeds. Drawings often put the source on the left, but that is habit, not a rule.

  11. 11. Can a transformer be used the other way round, with the source connected to the winding that normally feeds the load?
    Show answer

    Yes; that winding then becomes the primary

    In principle a transformer works both ways: whichever winding the source feeds is the primary. A step-down transformer fed from its low-voltage winding therefore steps the voltage up, provided its windings can take the voltages.

  12. 12. A transformer has three windings. One is fed from an AC source, and each of the other two feeds a load of its own. How many of its windings are secondaries?
    Show answer

    Two

    The winding fed by the source is the primary and every winding that feeds a load is a secondary, so this transformer has one primary and two secondaries; a transformer may have several secondaries.

  13. 13. What does the usual circuit symbol for a transformer look like?
    Show answer

    Two coils drawn side by side

    The symbol shows the two windings as coils side by side, as they sit on their shared former, often with the turns ratio beside them. Coils drawn end to end look like inductors in series, and zigzags are resistors.

  14. 14. Which best describes how a transformer is built?
    Show answer

    Two or more coils wound on the same former

    A transformer has two or more windings sharing a former, so the magnetic field of one passes through the others. Coils kept far apart would hardly couple, and plates with an insulator form a capacitor.

  15. 15. A transformer is described as 12:1. What does this tell you about its windings?
    Show answer

    The primary has twelve times as many turns as the secondary

    The primary turns are always given first, so 12:1 means twelve primary turns for every secondary turn. It gives only the proportion: the windings might have 1 200 and 100 turns, or 2 400 and 200.

  16. 16. A transformer has 1 500 turns on its primary and 250 turns on its secondary. How is its turns ratio written?
    Show answer

    6:1

    The primary turns come first: 1 500 ÷ 250 = 6, so the ratio is 6:1. Writing 1:6 puts the secondary first and would describe a transformer with six times as many secondary turns.

  17. 17. A 1:15 transformer has 120 turns on its primary. How many turns does its secondary have?
    Show answer

    1 800 turns

    In 1:15 the secondary has fifteen times the turns of the primary: NS = 120 × 15 = 1 800 turns. Dividing by 15 instead gives 8 turns, which would fit a 15:1 transformer.

  18. 18. A transformer’s turns ratio is 10:1. What can you NOT tell from this alone?
    Show answer

    How many turns each winding actually has

    A turns ratio compares the windings without giving their turns: 10:1 could be 200 and 20 turns or 5 000 and 500. As the primary is named first, it does show that the primary has more turns.

  19. 19. A transformer’s secondary winding has seven times the turns of its primary. Which turns ratio describes it?
    Show answer

    1:7

    The primary’s turns are written first, so a secondary with seven times the primary’s turns gives 1:7. Writing 7:1 would mean the primary has the extra turns, and the squared figures are not turns ratios at all.

  20. 20. Two transformers are marked 11:1 and 1:11. How do they differ?
    Show answer

    The 11:1 has more turns on its primary, the 1:11 more on its secondary

    A turns ratio always gives the primary first, so 11:1 has eleven primary turns for each secondary turn and 1:11 the reverse. They are different transformers, though either could be used the other way round.

  21. 21. A transformer has 500 turns on its primary and 200 turns on its secondary. How is its turns ratio written?
    Show answer

    2,5:1

    NP ÷ NS = 500 ÷ 200 = 2,5, written 2,5:1 with the primary first; a turns ratio need not be a whole number. 1:2,5 turns it upside down, and 300:1 subtracts the turns instead of dividing them.

  22. 22. How is a transformer’s turns ratio often shown on a circuit diagram?
    Show answer

    As numbers written beside the symbol

    The ratio is usually written in figures next to the symbol, such as 10:1. The loops drawn do not show the real number of turns, and the windings are neither shaded nor thickened.

  23. 23. What does the manual call the simple rule that the voltages across the primary and secondary windings follow?
    Show answer

    The transformer principle

    The manual calls it the transformer principle: the primary and secondary voltages are in the ratio of the turns, VP ÷ VS = NP ÷ NS. Ohm’s law relates voltage, current and resistance in one component instead.

  24. 24. In the manual’s transformer formulas, what does the symbol NS stand for?
    Show answer

    How many turns the secondary has

    NP and NS are the numbers of turns on the primary and the secondary, while the voltages are VP and VS and the currents IP and IS. The S stands for secondary, not supply: the supply feeds the primary.

  25. 25. For a transformer, what is the ratio of the primary voltage to the secondary voltage equal to?
    Show answer

    The ratio of primary turns to secondary turns

    The voltages are in the same ratio as the turns, VP ÷ VS = NP ÷ NS, so the winding with more turns has the higher voltage. The inverted ratio is the usual slip; differences and products of turns mean nothing here.

  26. 26. A transformer is marked 1:6. What kind of transformer is it?
    Show answer

    A step-up transformer

    In 1:6 the secondary has six times the primary’s turns, and more secondary turns give a higher secondary voltage, so it steps the voltage up. A 6:1 transformer, with fewer secondary turns, would step it down.

  27. 27. The label on a transformer reads 1:5. With 9 V AC across its primary, what is its secondary voltage?
    Show answer

    45 V

    VS = VP × NS ÷ NP = 9 × 5 ÷ 1 = 45 V, since a 1:5 transformer steps up. 1,8 V comes from dividing by 5, reading the ratio upside down; 225 V squares the ratio.

  28. 28. A transformer’s primary has 1 150 turns and its secondary 50 turns. What voltage does the secondary give when the primary is fed with 230 V AC?
    Show answer

    10 V

    VS = VP × NS ÷ NP = 230 × 50 ÷ 1 150 = 10 V. Multiplying by 1 150 ÷ 50 instead turns the ratio upside down and gives 5,29 kV, a step-up that these turns cannot give.

  29. 29. A 16:1 transformer has 240 V AC across its primary. What voltage appears across its secondary?
    Show answer

    15 V

    VS = VP × NS ÷ NP = 240 × 1 ÷ 16 = 15 V. Multiplying by 16 (3 840 V) reads the ratio upside down, and 0,94 V divides by 16², as if voltage followed the square of the turns ratio.

  30. 30. A 1:3 transformer gives 42 V across its secondary. What voltage is applied to its primary?
    Show answer

    14 V

    VP = VS × NP ÷ NS = 42 × 1 ÷ 3 = 14 V; the secondary has three times the turns, so three times the voltage. Multiplying by 3 (126 V) applies the ratio the wrong way round.

  31. 31. A transformer gives 46 V across its secondary when its primary is fed with 230 V AC. What is its turns ratio?
    Show answer

    5:1

    NP ÷ NS = VP ÷ VS = 230 ÷ 46 = 5, so the ratio is 5:1, primary first. 1:5 would describe a step-up transformer, and squared figures such as 25:1 belong to impedances, not voltages.

  32. 32. A transformer with 900 primary turns and 52 secondary turns is fed with 230 V AC. Which option is nearest to its secondary voltage?
    Show answer

    13 V

    VS = VP × NS ÷ NP = 230 × 52 ÷ 900 = 13,3 V, so 13 V is nearest. 4 kV comes from multiplying by 900 ÷ 52, the ratio upside down, and 0,8 V squares the ratio.

  33. 33. A 1:6 transformer has 38 V AC across its primary. Which option is nearest to the voltage across its secondary?
    Show answer

    220 V

    VS = VP × NS ÷ NP = 38 × 6 ÷ 1 = 228 V, so 220 V is nearest. 6,3 V comes from dividing by 6, reading the step-up ratio upside down, and 1,4 kV multiplies by 6².

  34. 34. A 4:1 transformer draws 0,5 A through its primary winding. How much current flows in its secondary?
    Show answer

    2 A

    IS = IP × NP ÷ NS = 0,5 × 4 ÷ 1 = 2 A: a step-down transformer delivers more current than it draws. 125 mA comes from dividing by 4, which is the voltage rule used for current.

  35. 35. A 1:10 transformer supplies 0,3 A to its load. What current flows in its primary?
    Show answer

    3 A

    IS ÷ IP = NP ÷ NS, so IP = IS × NS ÷ NP = 0,3 × 10 ÷ 1 = 3 A; a step-up transformer draws more current than it delivers. 30 mA applies the ratio the wrong way round.

  36. 36. How does the secondary current of a step-up transformer compare with its primary current?
    Show answer

    It is smaller, by the turns ratio

    Current changes the opposite way to voltage, IS ÷ IP = NP ÷ NS. A step-up transformer raises the voltage, so its secondary current is smaller, which keeps the power out equal to the power in.

  37. 37. A step-down transformer is feeding a load. Which of its windings carries the larger current?
    Show answer

    The secondary winding

    Current changes the opposite way to voltage. A step-down transformer lowers the voltage, so its secondary carries the larger current: a 10:1 transformer drawing 1 A from the supply gives 10 A to the load.

  38. 38. A transformer with 1 400 primary turns and 90 secondary turns draws 0,25 A in its primary. Which option is nearest to its secondary current?
    Show answer

    4 A

    IS = IP × NP ÷ NS = 0,25 × 1 400 ÷ 90 = 3,89 A, so 4 A is nearest. 16 mA comes from multiplying by 90 ÷ 1 400, the voltage rule used for current.

  39. 39. The load on an ideal transformer’s secondary is changed so that it draws twice the current. What happens to the primary current?
    Show answer

    It doubles as well

    IS = IP × NP ÷ NS, so with the turns fixed the primary current is in proportion to the secondary current: the load decides what the primary draws, and twice the load current means twice the primary current.

  40. 40. A transformer draws 0,2 A in its primary while its secondary supplies 4 A. What is its turns ratio?
    Show answer

    20:1

    IS ÷ IP = NP ÷ NS, so NP ÷ NS = 4 ÷ 0,2 = 20, giving 20:1: a step-down transformer, with more current out than in. 1:20 is the voltage rule applied to the currents.

  41. 41. A transformer has 200 turns on its primary and 1 000 turns on its secondary, which supplies 0,4 A. What current flows in its primary?
    Show answer

    2 A

    IP = IS × NS ÷ NP = 0,4 × 1 000 ÷ 200 = 2 A: five times the turns on the secondary means one fifth of the current there. 80 mA divides by 5 instead, the ratio the wrong way round.

  42. 42. Ignoring losses, how does the power a transformer passes to its load compare with the power it takes from the supply?
    Show answer

    Exactly the same amount

    Power out equals power in, apart from minor losses, so when a transformer raises the voltage it lowers the current in the same proportion. The turns ratio changes voltage and current, never the power.

  43. 43. An ideal 15:1 transformer supplies 2,5 A at 12 V to its load. What power does its primary draw from the supply?
    Show answer

    30 W

    An ideal transformer passes on all the power it draws: PP = PS = VS × IS = 12 × 2,5 = 30 W. Dividing by the turns ratio (2 W) treats power like voltage, but the turns ratio never changes the power.

    Try it: Ohm's Law & Power
  44. 44. An ideal transformer draws 60 W from the mains, and its secondary gives 12 V. What current does the secondary supply?
    Show answer

    5 A

    With no losses the secondary passes on the full 60 W, so IS = PS ÷ VS = 60 ÷ 12 = 5 A. Dividing 12 by 60 gives 0,2 A, the formula turned upside down.

    Try it: Ohm's Law & Power
  45. 45. Apart from the resistance of its windings, what is the other main cause of losses in a practical transformer?
    Show answer

    Eddy currents flowing in the core

    The manual names winding resistance and eddy currents, currents induced in the core itself, as the causes of the small losses. Stray capacitance between turns exists but is not where the power goes.

  46. 46. Besides eddy currents in its core, what else causes most of the power lost in a practical transformer?
    Show answer

    The resistance of its windings

    Current through the windings’ resistance turns some power into heat in the copper, and eddy currents heat the core; together they make up the few per cent a practical transformer loses. Capacitance is not a main cause.

  47. 47. Where do the eddy currents that waste power in a transformer flow?
    Show answer

    In the transformer’s core

    Eddy currents are induced in the core by its changing magnetic field and heat it, while the windings lose power through their resistance instead. Neither the mains cable nor the surrounding air carries them.

  48. 48. Roughly how efficient is a typical power transformer?
    Show answer

    Over 95%

    Power transformers are typically more than 95% efficient, losing under 5% of the power in winding resistance and core eddy currents, so a figure such as 75% would be poor. Calculations often treat them as ideal.

  49. 49. A small transformer that is 90% efficient draws 200 W from the mains. How much power reaches its load?
    Show answer

    180 W

    Efficiency = power out ÷ power in, so power out = 0,9 × 200 = 180 W, and the other 20 W is lost as heat. 200 W forgets the efficiency, treating the transformer as perfect.

  50. 50. A small transformer that is 80% efficient must deliver 40 W to its load. What power does it draw from the supply?
    Show answer

    50 W

    Power in = power out ÷ efficiency = 40 ÷ 0,8 = 50 W, of which 10 W is lost. Multiplying by 0,8 gives 32 W, less than the load itself takes, which no transformer can manage.

  51. 51. A transformer draws 250 W from the mains and delivers 225 W to its load. What is its efficiency?
    Show answer

    90%

    Efficiency = power out ÷ power in × 100% = 225 ÷ 250 × 100% = 90%; the missing 25 W is lost in the windings and the core. Dividing the other way round gives 111%, which is impossible.

  52. 52. A small transformer that is 85% efficient draws 1,2 A from a 240 V supply. Which option is nearest to the power it delivers to its load?
    Show answer

    250 W

    Power in = 240 × 1,2 = 288 W, and power out = 0,85 × 288 = 244,8 W, so 250 W is nearest. 290 W forgets the efficiency, treating the transformer as perfect.

    Try it: Ohm's Law & Power
  53. 53. What is the main reason that mains electricity is supplied as AC rather than DC?
    Show answer

    Transformers change AC voltages simply and efficiently

    Transformers raise AC to very high voltages for long-distance lines and lower it again near users, simply and with little loss: the principal reason mains supplies are AC. AC is no safer to touch than DC.

  54. 54. Why is electrical power sent over long distances at very high voltages?
    Show answer

    The lower current keeps heating in the lines small

    For a given power, a higher voltage means a lower current, and the heating in a line’s resistance depends on the current. Long-distance lines therefore run at up to about 800 kV, where the current is comparatively small.

  55. 55. The long-distance power network runs at very high voltage so that the current is relatively low. What does the low current reduce?
    Show answer

    Heating losses in the lines

    Heating in a line depends on the current through its resistance, so a low current keeps those losses small. It also loses less voltage on the way, so the far end gets more, not less.

  56. 56. Why is the voltage lowered in stages before electricity reaches homes?
    Show answer

    Lower voltages are far safer for people to use

    Very high voltages suit long-distance lines but are dangerous, so for safety the voltage is lowered near the user, to about 11 kV and then the mains voltage. The lines lose only a little voltage; transformers do the lowering.

  57. 57. Roughly what voltage do local distribution networks use, before the final step down to the customer?
    Show answer

    About 11 kV

    The manual gives around 11 kV for local distribution; the long-distance network runs at up to about 800 kV, and a final transformer brings the 11 kV down to the customer’s mains voltage.

  58. 58. The primary of a transformer draws 0,5 A from a 230 V AC supply. What resistance does the supply see at the primary terminals?
    Show answer

    460 Ω

    RP = VP ÷ IP = 230 ÷ 0,5 = 460 Ω, an apparent resistance set by the load, not the winding’s own resistance, which is far smaller. Dividing the other way round gives 2,17 mΩ.

    Try it: Ohm's Law & Power
  59. 59. An ideal transformer passes power from its supply to a resistive load. Where is that power dissipated?
    Show answer

    In the load connected to the secondary

    An ideal transformer dissipates nothing itself: the power passes through it to the load, where it is dissipated. That is why the resistance the supply sees at the primary is only an apparent one.

  60. 60. What does the manual call the effect by which a load on a transformer’s secondary appears as a different, related resistance at its primary?
    Show answer

    Impedance transformation

    The load resistance is changed by the transformer just as its voltage and current are, and appears at the primary as a related value: impedance transformation. Impedance matching is a use made of it.

    Try it: DIY Components
  61. 61. In AC circuits, impedance is a general quantity that combines which two things?
    Show answer

    Resistance and reactance

    Impedance combines resistance with reactance, the frequency-dependent opposition of inductors and capacitors to AC. Inductance, in henrys, is only one source of reactance, and capacitance provides the other.

  62. 62. How is the resistance that a load presents at a transformer’s primary related to the load resistance itself?
    Show answer

    Through the square of the turns ratio

    RP = RL × (NP ÷ NS)²: the voltage is multiplied by the turns ratio and the current divided by it, so their quotient, the resistance, changes by the ratio squared. Using the plain ratio is the usual slip.

    Try it: DIY Components
  63. 63. In a step-down transformer, how does the load resistance on the secondary compare with the resistance the source sees at the primary?
    Show answer

    The load resistance is smaller

    Resistance is transformed in the same direction as voltage, so a step-down transformer has the smaller voltage and the smaller resistance on its secondary: a 0,6 Ω load behind a 20:1 transformer looks like 240 Ω.

    Try it: DIY Components
  64. 64. A 3:1 transformer has a 50 Ω load on its secondary. What resistance does the source see at its primary?
    Show answer

    450 Ω

    RP = RL × (NP ÷ NS)² = 50 × 3² = 450 Ω. Multiplying by 3 alone gives 150 Ω, forgetting that impedance follows the square of the turns ratio.

    Try it: DIY Baluns & Ununs
  65. 65. A 1:4 transformer must present 50 Ω at its primary. What load resistance should be connected to its secondary?
    Show answer

    800 Ω

    RL = RP × (NS ÷ NP)² = 50 × 4² = 800 Ω, since a step-up transformer steps resistance up as well. Multiplying by 4 instead of 4² = 16 gives 200 Ω, the plain turns ratio.

    Try it: DIY Components
  66. 66. An amplifier designed for a 600 Ω load is to drive a 15 Ω speaker through a transformer. What turns ratio makes the speaker look like 600 Ω to the amplifier?
    Show answer

    6,32:1

    The impedance ratio is 600 ÷ 15 = 40, and the turns ratio is its square root: √40 = 6,32, so 6,32:1. Using 40:1 as the turns ratio would transform the impedance 1 600 times.

    Try it: DIY Components
  67. 67. Which option is nearest to the turns ratio that makes a 50 Ω load look like 400 Ω at a transformer’s primary?
    Show answer

    3:1

    The impedance ratio is 400 ÷ 50 = 8, and the turns ratio is √8 = 2,83, so 3:1 is nearest. 8:1 is the impedance ratio itself, not its square root, and 1:3 would make the 50 Ω look smaller, about 5,6 Ω.

    Try it: DIY Components
  68. 68. A transformer’s windings are in the ratio 8:1. A 600 Ω resistor is connected across the winding with fewer turns. What resistance appears across the other winding?
    Show answer

    38,4 kΩ

    The other winding has 8 times the turns, so it works at 8² = 64 times the impedance: 600 × 64 = 38,4 kΩ. Multiplying by 8 alone (4,8 kΩ) uses the turns ratio where its square belongs.

    Try it: DIY Components
  69. 69. A transformer with 400 primary turns and 140 secondary turns has a 75 Ω load. Which option is nearest to the resistance the source sees at the primary?
    Show answer

    600 Ω

    RP = RL × (NP ÷ NS)² = 75 × (400 ÷ 140)² = 75 × 8,16 = 612 Ω, so 600 Ω is nearest. Forgetting to square the turns ratio gives 214 Ω, hence the 210 Ω option.

    Try it: DIY Components
  70. 70. A transformer has a 3:1 turns ratio. What is its impedance ratio?
    Show answer

    9:1

    Impedance follows the square of the turns ratio, so 3:1 in turns gives 3² = 9:1 in impedance, with the higher impedance on the primary. Quoting 3:1 for the impedance is the plain-ratio slip.

    Try it: DIY Baluns & Ununs
  71. 71. A transformer’s primary must present 200 Ω to an amplifier while its secondary feeds a 50 Ω load. What turns ratio does it need?
    Show answer

    2:1

    NP ÷ NS = √(RP ÷ RL) = √(200 ÷ 50) = √4 = 2, so 2:1. A 4:1 turns ratio would raise the 50 Ω to 4² × 50 = 800 Ω, since impedance follows the square.

    Try it: DIY Baluns & Ununs
  72. 72. A 1:2 transformer has an 800 Ω load on its secondary. What resistance does the source see at its primary?
    Show answer

    200 Ω

    RP = RL × (NP ÷ NS)² = 800 × (1 ÷ 2)² = 800 ÷ 4 = 200 Ω; a step-up transformer makes its load look smaller at the primary. Dividing by 2 alone gives 400 Ω.

    Try it: DIY Components
  73. 73. A 2:1 transformer has a 12,5 Ω load on its secondary. What resistance does the source see at its primary?
    Show answer

    50 Ω

    RP = RL × (NP ÷ NS)² = 12,5 × 2² = 50 Ω, so turns in the ratio 2:1 give a 4:1 impedance step, as in a 4:1 balun. Doubling instead of multiplying by 4 gives 25 Ω.

    Try it: DIY Baluns & Ununs
  74. 74. A transformer must make a 1 100 Ω load on its secondary look like 50 Ω at its primary. Which option is nearest to the turns ratio it needs?
    Show answer

    1:4,5

    NP ÷ NS = √(50 ÷ 1 100) = √(1 ÷ 22) = 1 ÷ 4,69, so 1:4,5 is nearest, a step-up. 1:22 is the impedance ratio, not its square root.

    Try it: DIY Components
  75. 75. How does the input impedance of a typical receiver’s RF amplifier compare with the impedance of the antenna system feeding it?
    Show answer

    It is generally much higher

    A typical receiver’s RF amplifier has an input impedance well above, not below, the usual 50 Ω of an antenna system, so a transformer is often fitted to match the two and transfer the most power.

  76. 76. When does a source pass the greatest power to its load?
    Show answer

    When the load impedance equals the source impedance

    A source delivers the most power when the load impedance equals its own, which is why transformers are used to match the two. A far higher load impedance draws less current and so takes less power.

  77. 77. In an older-style power supply for 12 V radio equipment, what does the transformer do?
    Show answer

    It lowers the mains voltage to suit the equipment

    The mains voltage is far too high for 12 V equipment, so the transformer steps it down; a rectifier and smoothing circuit then turn the low AC voltage into the DC that the equipment needs.